Thickness calibration
Digital caliper measurements after sanding and finishing.
Quality & expertise
Testing & Inspection
The checks we run in production, and the properties verified by external laboratories.
In production
Checks on the factory floor
Moisture content
Veneer and panel moisture checked with moisture meters; the TDS declares < 12% (EN 322).
Dimensional inspection
Length, width and squareness checked against EN 315 tolerances (±1 mm).
Bending & stiffness
Bending strength and MOE verified on test equipment and by external laboratories (EN 310).
Independent laboratories
Externally tested properties
Laboratory results apply to the sample tested. They are evidence, not a guarantee for every batch.
| Method | Property | Report status |
|---|---|---|
| EN 310 | Bending strength & modulus of elasticity | Published |
| EN 438-2 | Abrasion resistance of film surface | Published |
| DIN 51130 | Anti-slip property (ramp test) | Published |
| JAS 0233-2 | Bending strength, 12 mm plywood | Published |
| EN 717-1 | Formaldehyde emission, 9 mm plywood | Published |
Request for quotation
Need documents for supplier qualification?
Request TDS, test reports, batch QC records and sourcing documents with your enquiry.
Sales: anna@kosmexgroup.com · +84 399 741 589